Powered by Spearhead Software Labs Joomla Facebook Like Button

NBCL 2300 NBCL 1300  

Gas burners for furnace heating and thermal afterburner

The chamber furnaces in the model series NBCL are used for heat cleaning of components. An optimum temperature uniformity is not a priority for these processes. Examples are heat cleaning of electric motors, coated surfaces of steel components or the nozzles of plastic injection molding machines. The furnaces are gas-fired and have an integrated thermal afterburner system which is also gas-fired. The pre-set, low-oxygen respectively reducing atmosphere in the furnace effectively prevents spontaneous combustion at the workpiece and subsequent damage as a result of over-temperature. The generated exhaust gases are guided from the furnace chamber into the thermal afterburner where they are incinerated. Depending on the type of exhaust gas involved complete incineration is possible. For safe operation, the furnace door locks after program start and cannot be opened again until the temperature has dropped below 180 °C at the process end. In case of a burner flame malfunction or gas shortage the process is aborted. In addition, the control system is equipped with an over-temperature limiter with manual reset that is set by the customer at a safe cut-off temperature to switch off the furnace if the limit is exceeded. The furnaces are not suitable for components and coatings that contain solvents or a high concentration of water. These models must also not be used for charges with low flash points such as wood, paper or wax.

  • Tmax 500 °C
  • Standard sizes with furnace chambers up to 2500 liters
  • Furnace housing with equipped for safe transport with forklift
  • Furnace chamber size dimensioned to hold standard lattice boxes
  • Furnace chamber insulation made of non-classified fiber material, floor and rear wall insulated with lightweight refractory bricks
  • High performance, atmospheric burner fueled by liquified gas or natural gas
  • Completely automated temperature controls
  • Integrated thermal afterburner for exhaust gas cleaning
ModelTmaxInner dimensions in mmOuter dimensions in mmBurner rating furnace chamberBurner ratingTNV
 °CwdhWDHin kWin kW
NBCL 1300 500 1200 900 1000 2160 2310 2450 50 100
NBCL 2300 500 1200 1200 1600 2160 2605 3050 100 100
NBCL 2500 500 1200 1600 1300 2160 3000 2750 100 100

Informatie aanvragen

Ga naar boven